fire
logo


23850 Freeway Park Drive
  
Farmington Hills, MI 48335  
248-596-9000  
248-919-3212  
sales@premierfurnace.com  

>

Used equipment for sale

Premier Furnace Specialists has a variety of used thermo processing and heat treating equipment and furnaces available. If you don't see what you need, give us a call. We will try to find it for you.

Batch Temper Furnaces

Brazing Furnaces

IQ Furnaces

Mesh Belt Furnaces

Pit Furnaces

Roller Hearth Furnaces

Vacuum Furnaces

Hi-Temp Box Furnance

Ovens

Gas Dryers

Endothermic Generators

Exothermic Generators

Other Equipment (Air Flow Panels, etc.)

BATCH TEMPER FURNACES

E-027

Lindberg Batch Temper Furnace

Year built: Unkown
Size: 24" x 48" x 18"
Serial: 16908
Type: 244818-G12


Description: Good Condition, ready to operate, Gas Fired, Honeywell Round Chart Recorder, Honeywell Overtemperature, Barbara Coleman temperature controller

Contact us for pricing





spacer

Surface Combustion Batch Temper Furnace

Year built: Unkown

Description: Rebuilt Surface Combustion 30" W x 48" L x 30" H Batch Temper Furnace. Gas-fired. 1350 deg. F max. temperature.

Contact us for pricing



Box Draw Furnace

BRAZING FURNACES

E-018

14-inch wide Aluminum Brazing Furnace

Year built: 1980 and rebuilt in 1998

Description: Aluminum Brazing Furnace with 14-inch wide woven wire mesh belt with 8-inch clearance above the belt. Furnace was rebuilt in 1998 to include new controls, updated electrical cabinet, new insulation and new paint. 1350 degrees F maximum operating temperature. The furnace is electrically heated with newer silicon carbide heating elements in two (2) zones of temperature control with SCR control modules. Twenty (20) feet of water-jacketed cooling sections. Three-foot long load table. Two-foot long unload table. Overall size is approximately 6 feet wide x 50 feet long.

Contact us for pricing

Complete Specifications (92k pdf document)



C. I. HayesMesh Belt Aluminum Brazing Furnace

spacer

E-054

18-inch wide Alhern-Martin Brazing Furnace

Year build: 1990s

Description: Alhern-Martin Brazing Furnace with 18-inch wide woven wire mesh belt with 8-inch clearance above the belt. 2150 degrees F maximum operating temperature. The furnace is electrically heated in two (2) zones of temperature control. 30 feet of water-jacketed cooling sections. Eight foot long load table. Eight foot long unload table. Overall length is approximately sixty-one feet. Available for inspection in our facility in Farmington Hills, MI.

Contact us for pricing

Complete Specifications (76k pdf document)



spacer

E-021

20-inch wide Alhern-Martin Brazing Furnace

Year build: 1997

Description: Alhern-Martin Brazing Furnace with 20-inch wide woven wire mesh belt with 8-inch clearance above the belt. 2100 degrees F maximum operating temperature. Heating is provided by silicon carbide elements above and below the hearth for even heat distribution. 10 Thermocouples with digital readouts every 2’ heat. Thermco hydrogen meter, Endress Hauser Dew Point Meter. 8-foot long load table. 8-foot long unload table. Overall length is approximately 67 feet. This equipment can be viewed upon request.

Contact us for pricing

Complete Specifications (74k pdf document)



spacer

(Newly Rebuilt)

E-040

28-Inch Alhern-Martin Mesh Belt Furnace

Year Built: 1990, Just rebuilt with all new brick insulation

Description: 28" wide mesh belt electric furnace with maximum temperature of 2,100°F, two control zones. Furnace is 85 feet long, composed of 10' long charge table, 16' long heating chamber, 40' cooling section and 7' discharge table.

Complete Specifications (PDF document)

Contact us for pricing




IQ FURNACES

E-024

Lindberg Integral Quench Furnace

Year built: Unknown
Size: 24" x 48" x 18"
Type: 13CT244818-18AQC-1S
Max Temp: 1850 F
Voltage: 480/3ph
Condition: Very Good, Ready to operate


Description: Gas fired with Eclipse, single-ended recuperative burners spark ignited; Furnace passed survey +/- 25 F: Dual quench aggitation: Oil heat exchanger; Rear Handler; Water cooled hi heat fan; Nitrogen/Methanol flow panel (can easily be converted to Endothermic); Marathon Monitors carbon monitoring systmen; Honeywell Quench temperature controller; Eurotherm Quench overtemp; Eurotherm Temperature/carbon controller; Eurotherm Permissive controller

Contact us for pricing





spacer

Now Available!

Seco/Warwick Gas-Fired I/Q Line

Year built: 1990s

Description: Seco/Warwick gas-fired batch integral quench atmosphere furnace with a 24"x36"x24" brick-lined workspace.

Included equipment: Two gas-fired companion draw furnaces; one electrically heated spray and dunk companion washer; one gas-fired endothermic gas generator; one powered load car. Miscellaneous equipment includes load tables and roller storage conveyor, scissors lift table, eight alloy base trays, spare parts, cool down station and three sets of operating manuals and prints.

Contact us for pricing

Complete Specifications (92k pdf document)




spacer

Just Added!

Holcroft Integral Quench Furnace

Description: Holcroft Integral Quench Furnace with top cool option
Size: 36” x 48” x 30”
Gross capacity: 3000 Lbs.
Max. Temp: 1825 degrees F
Controls: Honeywell and graphics panel
Voltage: 480/60/3ph
Condition: Good


Description: Gas fired radiant U-tubes with Recuperators, Endothermic atmosphere, water cooled recirculation fan, Rear handler pusher, 3400 gallon electrically heated quench tank 140-160 degree F, SBS air cooled heat exchanger, Oil cooled top cool with recirculation fan. Furnace is currently installed and to be removed shortly. Price to be determined.

Contact us for pricing





spacer

MESH BELT FURNACES

Recently Refurbished!

E-029

Watkins-Johnson Continuous Mesh Belt Furnace

Year build: 1994, recently refurbished

Description: Watkins-Johnson Model #CA24-250 continuous mesh belt furnace, originally built in 1994 and recently refurbished to factory-new condition. Stored in shrink wrap (fully tested – but not used). 25 Ft OA length. 400 Lbs per hour @ 1,400°F operating temperature & 2,000°F maximum temperature. 480 VAC 3 Phase 60 Hz. Electrically heated. Has new 24” wide SS belt with side plates, new Hi-Watt temperature controllers, new Honeywell hi-limits, new Waukee Flo-Tronic flow meters for nitrogen/hydrogen atmosphere, and new Honeywell QXE paperless recorder. Gas-tight Inconel 601 muffle. All heating elements tested & functional.

Contact us for pricing



PIT FURNACES

Lindberg Pit Draw Furnace

Year built: Unknown

Description: Lindberg pit-type draw furnace with 72" x 72" workspace. Gas-fired. 1350 deg. F max. temperature

Contact us for pricing





ROLLER HEARTH FURNACES

Surface Combustion Roller Hearth Bar Heating Furnace (Small) 

Year build: 1972

Description: Surface Combustion roller hearth furnace for heating bar stock. Effective work size is 5-inch-3-inch wide x 10-inch high clearance x 43-inch-0-inch long. Heating capacity is 4000 lbs./hr. to 1575 deg. F. Surface Combustion direct-fired burner system in four (4) zones of control. Updated burner control panel with Honeywell UDC controllers and MIC paperless recorder.

Contact us for pricing



spacer

Surface Combustion Roller Hearth Bar Heating Furnace (Large)

Year build: 1975

Description: Surface Combustion roller hearth furnace for heating bar stock. Effective work size is 5-inch-3-inch wide x 10-inch high clearance x 83-inch-3-inch long. Heating capacity is 6500 lbs./hr. to 1575 deg. F. New Eclipse -inchThermJet-inch direct-fired burner system in six (6) zones of control installed in 2004. New motor and burner control panel with Honeywell UDC controllers and MIC paperless recorder installed in 2004. New furnace wiring installed in 2004.

Contact us for pricing



VACUUM FURNACES

Just added

E-048

Used Vacuum Furnace

MFG: Remanufactured by Elatec Technology Corporation

Model: Versa vac-101020-1315

Serial: 99 ETC1477

Size: 14” wide x 24” deep x 13” tall

Contact us for pricing




 
spacer

Two furnaces available!

E-046

2 (two) Vac-Aero Vacuum furnaces

Description: Front Load Vacuum Furnace with Honeywell & Allen Bradley Digital Temperature Controls.

Year built: 2001; Refurbished later GM

Model: VAH-2024-HV2

Maximum Temperature: 2400 F

Hot Zone Measurements: 16 inches wide x 24 inches deep x 12 inches high

Capacity: 300-pound capacity.

Included equipment: Units are identical except Package #1 is less Hot Zone and Package #2 is less Booster Pump.

Contact us for pricing




spacer

Surface Combustion Hp243618-2 Vacuum Furnace

Year build: 1980

Description: The furnace has been used daily by the original owner since it was new. The furnace is rated to 2400°F, but has never been used over 2050°F. It is not positive pressure and has a 30 HP fan. The furnace is due for a new liner. Included with the furnace are at least 2 complete sets of heating elements and some graphite board. The pictures are current and show the original placement of the furnace. The temperature controllers were updated to digital instruments within the last few years. The furnace shell was recently ultrasound inspected and there is no shell thickness loss. Being sold “As is, Where is.”

Contact us for pricing



High Temperature Box Furnaces

Just Added!

E-078

Grieve Box Furnace

Description: Box Furnace single swing out door

Year of Manufacture: 2000

Model: AA-1250

Serial: 340117

Work Area: 24” x 24” x 24”

Maximum Temperature: 1250° F

Heating: Electric 18 Watts

Voltage: 460 V/3PH/60HZ/25AMPS

Controls: Watlow Controller, Chart recorder, High Limit

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-080

Unique Electric Box Furnace

Description: Swing down door, Hi Temperature Box Furnace

Model: MP-120-GM

Serial: 7737 Work Area: 18” wide x 24” deep x 14” high

Operating temperature: 1100C/2012F

Heating: Electric 15 KW

Controls: Eclipse Controller, Honeywell Hi Limit

Voltage: 240 volt/3 PH/50-60 HZ

Condition: Very Good

Contact us for pricing




spacer

Just Added!

J-2145

Premier Furnace Specialists/BeaverMatic

Description: High Temperature Box Furnace with air lift door

Model: HBF

Serial: J-2145

Work Area: 12”wide x 20”deep x 10” tall

Operating Temperature: 1900F

Heating: Electric 12 KW

Controls: Honeywell controller, Hi limit

Voltage: 480V/3PH/60HZ

Condition: Brand New

Contact us for pricing




OVENS

Just Added!

E-023

Despatch Walk in Oven

Work Area: 54” wide x 72” deep x 84” tall

Maximum Temperature: 500 F

Power required: Gas Fired

Controls: Partlow Temperature Controller, Honeywell High Limit Controller; On-off push buttons for recirculating fan

Description: Walk-in oven with double door opening. Heated air is circulated within the work area by way of sidewall louvers, and upper air return vents.Gas burner, recirculating fan, and exhaust fan are located in a separate plenum behind work area

Heater Capacity: 150,000 BTU/Hr at 1000 BTU / CU FT @ 6-8 inch WC

Condition: Very Good

Contact us for pricing



spacer

Just added

E-049 and E-050

Steelman Burn-Off Ovens (Two Still Available)

Description: Two Steelman Burn-Off Ovens (2 have been sold)

Model: 454-BA-C

Serial: B070600, B070633, B100712, B100713

Work area: 48” wide x 54” deep x 62” high

Maximum loading: 10,000 LBS

Operating temperature: 900 degrees Fahrenheit

Maximum temperature: 1000 Degrees

Burn off Section: 1850 degrees Fahrenheit

Burners: Gas Fired, (2) Eclipse burners @ 420,000 BTU total

Controls: Honeywell UDC2500

Voltage: 120 vt, 1 phase, 60 HZ

Condition: Very Good

Contact us for pricing


 
spacer

Just Added!

E-053

Bayco Oven Box Furnace

Type: Box Furnace, floor style,

Work area: 41 inches wide x 38 inches high x 38 inches deep

Temperature rating: 900 Degrees Fahrenheit

2 Package Burner Systems

2 Orman Temperature Controllers

1 Partlow High Limit

1 Partlow Circular Chart Recorder

Contact us for pricing



spacer

Just Added!

E-055

Despatch Walk-in Oven

Work Area: 70” wide x 68” deep x 68”high

Maximum Temperature: 500 F

Power required: Gas Fired

Controls: Partlow Temperature Controller, Partlow High Limit Controller; On-off push buttons for recirculating fan

Description: Walk-in oven with double door opening. Heated air is circulated within the work area by way of adjustable sidewall louvers, and upper air return vents. Eclipse Natural Gas burner, recirculating fan, and exhaust fan are located in a separate plenum above the work area

Heater Capacity: 250,000 BTU/Hr at 81,000 BTU / CU FT @ 6-8 inch WC

Contact us for pricing



spacer

Just Added!

E-056

JPW Walk-in Oven

Work Area: 48” wide x 48”deep x 48” tall

Maximum Temperature: 500 F

Power required: 480 volts, 3 phase, 60 hz.

Controls: YokagowaTemperature Controller, Watlow High Limit Controller; On-off push buttons for recirculating fan

Description: Walk-in oven with double door opening. Heated air is circulated within the work area by way of adjustable sidewall louvers, and upper air return vents. Recirculating fan, and exhaust fan are located in a separate plenum above work area

Heating: Electric

Contact us for pricing



spacer

Just Added!

E-057

Despatch Walk-in Oven

Condition: Excellent

Work Area: 58”wide x 68” deep x 64” high

Maximum Temperature: 850 F

Power required: 480/240 volt, 216/108 amps, 3 phase

KW: 90

Controls: Partlow Temperature Controller/High Limit Controller; On-off push buttons for recirculating fan

Description: Walk-in oven with double door opening. Heated air is circulated within the work area by way of sidewall louvers, and upper air return vents. Electrically heated, recirculating fan, and exhaust fan are located in a separate plenum behind work area

Contact us for pricing



spacer

Just Added!

E-065

Blue M Electric Lab Furnace

Model: B-2730-Q

Serial: 19X-180-90

Work Area: 14” x 14” x 14”

Operating temperature: 650F

Maximum temperature: 700F

Controls: Pro set controller and Hi limit

Voltage: 208V/1PH/60HZ/14amp

Condition: Like New

Contact us for pricing




spacer

Just Added!

E-066

Thermcraft Double Door Box Oven

Description: Electrically heated with air recirculation blower

Model: OVS-383838-454—HD-J1618-14

Serial: 982373

Work area: 36” x 36” x 36”

Maximum Temperature: 850 degrees F

Controls: Partlow 1400 Temperature controller, Omron Over temperature

Voltage: 230V/80amps/30000watts

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-067

Bayco Burn Off Oven

Description: Two door oven, with burn off chamber. 5-72” and 1-36” insulated stacks included

Model: BB-484838-GE

Serial: C14027

Work Area: 60”wide x 60”deep x 36”tall

Maximum load: 4000#

Oxidizer Temperture: 1400-1600F

Operating Temperature: 1600-1800F?

Burners: 2 Guspro Burners 750,000 BTU each burner

Controls: Omron Controllers and over temperature, Honeywell flame relays

Voltage: 460V/60H/3PH/6AMP

Condition: Excellent/Like New

Contact us for pricing




spacer

Just Added!

E-068

Lindberg/Blue M Box/Lab Furnace

Description: One swing type door, Electrically heated, high temperature lab furnace.

Model: BF51828C-1

Serial: W24W-500430-WW

Work Area: 12”Wide x 12”High x 17”Deep

Maximum Temperature: 1100C/2012F

Controls: Digital, UP150

Voltage: 208/240, 23.3 Amps, 50/60 Hz, 5.6 Kw, 1 phase

Condition: Like New/Excellent

Contact us for pricing




spacer

Just Added!

E-069

Lindberg/Blue M Box/Lab Furnace

Description: One swing type door, Electrically heated, high temperature lab furnace.

Model: BF51828C-1

Serial: W24W-500430-WW

Work Area: 12”Wide x 12”High x 17”Deep

Maximum Temperature: 1100C/2012F

Controls: Digital, UP150

Voltage: 208/240, 23.3 Amps, 50/60 Hz, 5.6 Kw, 1 phase

Condition: Like New/Excellent

Contact us for pricing




spacer

Just Added!

E-070, 071, 072, 073, 074, 075

Dispatch Electric Oven

Description: Six (6) ovens available; 2 door oven with shelves and manuals

Model: CBBI-69-2

Serial numbers: 186764, 186765, 187745, 188391, 188392, 189746

Work Area: 28” wide x 18” deep x 22” high

Operating temperature: 204C/400F

Controls: Yokogawa/Ransco

Voltage: 240/1 PH/50-60HZ

Heating: Electric 2400 watts/10 amps

Condition: Excellent

Contact us for pricing




spacer

Just Added!

E-077

Title: Cascade TEK electric oven

Description: Single swing out door with manuals

Model: TFO-28

Serial: 07026131

Work Area: 31” wide x 61” high x 26” deep

Operating Temperature: 300C/572F

Heating: Electric, 10,300 watts

Controls: Watlow Voltage: 230 volts/50-60 HZ/50 amps

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-079

Blue M electric oven

Description: Single swing out door, with shelves

Model: MP-336F-1

Serial: MP-444

Work Area: 25” wide x 20” deep x 38” high

Operating Temperature: 343C/650F

Heating: Electric 24 amps

Controls: Eurotherm Hi Limit, Controller, Dickson Chart Recorder

Voltage: 208-240 volt/3 PH/50-60 HZ/24 amps

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-081

Blue M Oven

Description: Single Swing Door, with Shelves

Model: DC-606A-GHP-1

Serial: DC-5837

Work Area: 36” wide x 48” deep x 60” high

Operating Temperature: 600F

Heating: Electric 48 amps

Controls: Omega Controller, Eurotherm Hi Limit

Voltage: 480 volt/3 PH/50-60 HZ/48 amps

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-082

Blue M Oven

Description: Single swing out door with shelves

Model: POM-333C-1

Serial: P13-2411

Work Area: 25”wide x 20”deep x 38” tall

Operating Temperature: 204°C

Heating: Electric

Controls: Blue M

Voltage: 240V/1PH/60HZ/23AMP

Condition: Good

Contact us for pricing




spacer

Just Added!

E-083

Blue M Oven

Description: Single swing out door with shelves

Model: OV-712-A

Serial: OV-5-1639

Work Area: 12”wide x 12”deep x 12” tall

Operating Temperature: 100-500°F

Heating: Electric 975Watts

Controls: Blue M

Voltage: 120V/1PH/60HZ/

Condition: Good

Contact us for pricing




spacer

Just Added!

E-084

Blue M Oven

Description: Single swing out door with shelves, N2 Flow Meters

Model: ESP-400A-5

Serial: Z22E-227286-ZE

Work Area: 18”wide x 15”deep x 18” tall

Operating Temperature: 500°F

Heating: Electric

Controls: Omron

Voltage: 120V/1PH/60HZ/16.5AMP

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-085

Lindberg Blue M Oven

Description: 6” mesh belt oven with N2 Flow Meters

Model: 841-A6-B4-C4-D4

Serial: 929035-E

Work Area: 6” wide belt x 2-1/2” tall

Operating Temperature: 300° C

Heating: Electric

Controls: Lindberg

Voltage: 230V/3PH/50HZ/16.5AMP

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-086

Blue M Oven

Description: Single swing out door with shelves

Model: ESP-400A-5

Serial: Z22E-227275-ZE

Work Area: 19”wide x 15”deep x 18” tall

Operating Temperature: 100-500°F

Heating: Electric 1.5 KW

Controls: Omron

Voltage: 120V/1PH/60HZ/16.5AMP

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-087

Description: Single swing out door with shelves, N2 Flow meter

Model: DCC-256C

Serial: DCC-201

Work Area: 21”wide x 20”deep x 20” tall

Operating Temperature: 50-250° C

Heating: Electric

Controls: Omega Controller/Chart

Recorder Voltage: 208-240V/1PH/60HZ/29AMP

Condition: Very Good

Contact us for pricing




spacer

Just Added!

E-088

Description: Single swing out door with shelves, N2 Flow Meters

Model: CC04I-P-E-PRO350

Serial: CC-221

Work Area: 20”wide x 20”deep x 20” tall

Operating Temperature: 350° C

Heating: Electric

Controls: Omron

Voltage: 240V/3PH/60HZ/15 AMP

Condition: Very Good

Contact us for pricing




GAS DRYERS

Lectrodryer Gas Dryer

Year build: New!

Application: Drying 3000 SCFH of dissociated ammonia to -100-inchF outlet dewpoint.

Description: (1) GAS-B-75 Lectrodryer automatic adsorption heat reactivated gas dryer for dissociated ammonia service. Operation is to be automatic from a 460 volt, 3 phase, 60 cycle power supply. Unit is to have 1½" piping and valves, and a NEMA 1 electrical enclosure.

Standard features of the GAS-B-75 include Allen Bradley PLC, electric reactivation heaters, thermostatic over-temperature protection, lubricated 4-way valves, dial thermometer in the reactivation exhaust piping, calibrated direct reading purge flowmeter with adjustable micrometer valve, reactivation indicating lights, carbon steel pressure vessels, relief valves on each absorber and locally mounted pressure gages. Initial charge of molecular sieve is also included.

Contact us for pricing



Lectrodryer Gas Dryer


ENDOTHERMIC GAS GENERATORS

Surface Combustion 4500 CFH Endothermic Generator   

CFH Output: 4,500

Description: Newly updated with Eclipse direct spark ignited burners with flame supervision (no pilots required), SSI carbon probe with automatic dew point control, new electrical control panels with IEC controls/circuit breakers, Marithon Monitors controller, new gas train with Dungs main valve, blocking valve, and pressure switches. Available for immediate shipment. Very good condition.

Contact us for pricing





spacer

Surface Combustion 10,000 CFH Endothermic Generator   

Year built: 1993
Model: RX-50-100-4V
Serial: AC-43208-1
CFH Output: 10,000

Description: Surface Combustion 10,000 CFH endothermic gas generator, 4 modules, air cooled heat exchangers, dual pumps. Complete air conditioned control panel with CaseMate controller, Barbara Coleman recorder. Catwalk with ladder for easy access to heat exchangers. All exhaust hoods and stack work and support frame is included. This generator is in very good condition and is available for immediate shipment.

Contact us for pricing





spacer

Surface Combustion 5600 CFH Endothermic Gas Generator

Year built: N/A

Description: 5600 cfh. Gas Fired. Recently charged with new catalyst. Air Cooled. All new pressure switches, gas train up to code. Retort and brick inspection results are great. Newer Honeywell controls. New SSI probe, burn out panel, controller, flow meter. Full automatic control. Fresh paint

Contact us for pricing





spacer

Surface Combustion 5000 CFH Endothermic Gas Generator

Year built: 1992

Description: Two-Bottle, Two-Chamber, Gas-fired Endothermic Gas Generator rated @ 5000 CFH with ATP/Casemate® Process Controller with Dew Point Control System, on-line burn-out system, auxiliary mixture pump and two (2) Honeywell UDC 2000 high limit instruments.

Contact us for pricing

Complete Specifications (72k pdf document)





EXOTHERMIC GAS GENERATORS

E-022

Sunbeam 2,000 EXO Exothermic Generator

Year built: N/A

CFH Output: 2,000

Description: Sunbeam 2,000 CFH exothermic gas generator. Water cooled jacket, end elbow, and tube bundle. Steam trap.
Fire check. New direct spark ignited burner (no-pilot). New thermocouple and protection tube. New Honeywell controller.
New flame relay. New UV Scanner. New ignition transformer.

Generator is in very good condition. This unit has been test fired and is ready to go.

Contact us for pricing





spacer

Just Added!

E-042

Seco Warwick Generator

Description: 2000 CFH Exothermic Gas Generator, Direct fired (no Pilot) burner, Waukee Flow Meters, Honeywell Flame Relay/Scanner, Honeywell Controller. Completely test fired.

Model: 2000 CFH

Operating Temperature: 2000F

Heating: Natural Gas Voltage: 480 volts/3 PH/50-60 HZ

Condition: Very Good

Contact us for pricing




spacer

Premier Furnace 4000 CFH Exothermic Gas Generator
with Air-Cooled Gas Dryer

Year build: 2006

Description: Premier Furnace Specialists 4000 CFH Exothermic Gas Generator with air-cooled gas dryer (click here for photo).

Contact us for pricing

Complete Specifications (92k pdf document)



Premier Furnace Specialists 4000 CFH Exothermic Gas Generator with air-cooled gas dryer

OTHER EQUIPMENT

E-031

Airco Flowmeter Panel #1

Year build: 1990

Description: Airco Atmosphere Control Panel for 3-Zone furnace. Panel has flowmeters for three (3) zones of Nitrogen addition, one (1) zone of Hydrogen addition and one (1) zone of natural gas addition. Pressure gages for Nitrogen, Hydrogen and Natural Gas. Panel is in very good condition.

Contact us for pricing

Complete Specifications (72k pdf document)



spacer

E-032

Airco Flowmeter Panel #2

Year build: 1986

Description: Airco Atmosphere Control Panel for 3-Zone furnace. Panel has flowmeters for three (3) zones of Nitrogen addition, one (1) zone of Hydrogen addition and one (1) zone of natural gas addition. Pressure gages for Nitrogen, Hydrogen and Natural Gas. Panel is in very good condition.

Contact us for pricing

Complete Specifications (72k pdf document)



spacer

It is understood that as Used Equipment, the equipment and goods referenced here are being sold to the Buyer
As Is and with all faults; and Where Is in the equipment's present location.

Premier Furnace Specialists would be pleased to offer a quotation for the rebuild and turnkey installation of any of the used equipment that we offer.

For any questions about our used equipment, please contact us at 248-596-9000 or sales@premierfurnace.com

spacer


Home | New Equipment | Used Equipment | Services | Rebuilds | Preventative Maintenance | Replacement Parts
Equipment Relocation | About Us | Contact Us | Employment Opportunities | News [ Privacy Policy